The PowerPlasma 62i is now available in a CNC only package. This unit comes with all the basics to get started with your Plasma table, including a CNC port, and CNC torch. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop operating a small plasma table. The PowerPlasma 62i is built on an inverter platform, making use of IGBT technology to reduce weight, and improve reliability and performance. The unit has plenty of cut capacity with a recommended 3/8″ regular cuts, maximum clean cut capability is up to 3/4″ (at reduced speeds). Pierce up to 5/16″ for production cutting. The new iPT 60 CNC torch is a part of our package and features a proven long life with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
Features & Benefits
New Bezel and stackable feature!
Comes with CNC torch (Hand torch not included)
Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
Cuts virtually any type of metal with ease
Simple to use torches with inexpensive service parts and consumables
Commercial class, 60% Duty cycle at 60 amps for CNC use
Clean, smooth cuts with the genuine iPT 60 CNC torch
Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
Pilot arc improves performance and cutting on dirty, painted, or rusted metals
3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
Digital readout for air pressure, allows quick verification of air pressure
Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
Adjustable postflow timer for maximum consumable life
IGBT components improve reliability and performance while reducing overall weight
CNC socket for CNC use on plasma tables with included machine torch
NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD)
What's Included
iPT60 CNC Machine Torch - 8m with Euro quick-connect central adapter
Work clamp with 3m cable and 25 series DINSE style connector
Regulator/Water trap (this is not an air dryer)
Consumable Starter Kit
1.8m Power input cable with NEMA 6-50 Plug
Tech Specs
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-60A; 88-104V
OCV:
240V
Max Inrush ( I1MAX ) Amps:
41A
Maximum Rated (I1EFF ) Input Amps:
32.4A
Duty Cycle At Rated Amps/Volts:
60% @ 60A/104V
100% @ 50A/100V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
iPT60
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium | Requires Gouging Consumables (Not Recommended)
Recommended Cutting Air Pressure:
75 psi
Recommended Compressor Capacity:
6CFM @ 90 psi/ 30 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
Minimum Maximum
Up to 9/16" daily use @ 15-20 ipm
Up to 3/4" clean cut @ 8-12 ipm
Up to 1" severance cut @ 3-5 ipm
Max Pierce CNC Up to 3/8"
Plasma cutting quality + capacity is affected by several factors.
Features a " blow-back" iPT 25i torch (4m) (S45 Consumables)
Inexpensive consumables can usually be bought locally
35% duty cycle
OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine
OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if air pressure is too low or has become disconnected
