Make a list of everything you want in a plasma cutter. Chances are that you’ll come up with a list that matches up pretty closely to the list of features of the Everlast PowerPlasma 62i. It has has the convenience, portability and performance that will meet the needs of everyone from the weekend enthusiast to the welding and fabrication shop. The PowerPlasma 62i is built on an inverter platform, making use of IGBT modules from Infineon (Siemens) to reduce weight, and improve reliability and performance over the individual IGBT design. The unit has plenty of cut capacity with a recommended 9/16″ daily cut, a 3/4″ clean cut ,1″ severance cut and up to 3/8″ CNC. The new iPT 60 torch (4m) is part of the standard package and features a proven long life Italian design with blow back start, pilot arc and a variety of consumable choices. The PowerPlasma 62i features a 3 second tip saver to reduce premature consumable wear by limiting pilot arc on time, if no cutting is taking place.
Features & Benefits
New Bezel and stackable feature!
IGBT Inverter Plasma Cutter
Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
Cuts virtually any type of metal with ease
60% Duty cycle at 60 amps
iPT 60 Torch
Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
Pilot arc improves performance and cutting on dirty, painted, or rusted metals
3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of continuous operation
Digital readout for air pressure, allows quick verification of air pressure
Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
Adjustable postflow timer for maximum consumable life
CNC socket for CNC use on plasma tables (machine torch optional)
NOTE: When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD)
What's Included
iPT60 - 4m Hand Held Plasma Torch with Euro quick-connect central adapter
Work clamp with 3m cable and 25 series DINSE style connector
Regulator/Water trap (this is not an air dryer)
Consumable Starter Kit
1.8m Power input cable with NEMA 6-50 Plug
Tech Specs
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-60A; 88-104V
OCV:
240V
Max Inrush ( I1MAX ) Amps:
41A
Maximum Rated (I1EFF ) Input Amps:
32.4A
Duty Cycle At Rated Amps/Volts:
60% @ 60A/104V
100% @ 50A/100V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
iPT60
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium | Requires Gouging Consumables (Not Recommended)
Recommended Cutting Air Pressure:
75 psi
Recommended Compressor Capacity:
6CFM @ 90 psi/ 30 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
Minimum Maximum
Up to 9/16" daily use @ 15-20 ipm
Up to 3/4" clean cut @ 8-12 ipm
Up to 1" severance cut @ 3-5 ipm
Max Pierce CNC Up to 3/8"
Plasma cutting quality + capacity is affected by several factors.
